Let's say you want to use different page numbers or number formats and styles in different parts of your document. You could use page numbers such as i, ii, iii… for the introduction and table of contents and 1, 2, 3… for everything after. The trick is to divide the document into sections and to make sure those sections aren’t linked. Then, set the page numbering for each of those sections by following these steps.
i have a similar but bigger problem… the thing is that i installed the same font on 2 different machines (both with same os and software) the font is gill sans condensed, but it looks different on each one… the machines have exactly the same stuff and configuration… i even checked the screen dpi, the font smothness, etc but had no luck, anyone had this problem before? they look way too different, as if it was another font, but if i open a flash document, it would warn you if the font wasn’t installed, but it doesn’t (so this means that the font is installed) it just displays different… any clue?
      Now I know this is a big change for Corel. Traditionally, they have been opposed to policing how many times you installed the program on x number of computers. They seemed to be more concerned with the number of users than how many paid licenses they had. I can remember that for years you could buy the upgrade version and install it as a full version without ever needing to show a previous version as your proof of ownership. In all my years of buying software, I had never seen this before CorelDRAW. Well I guess Corel, like everyone else, is trying to clamp down and control who is using the program. Because of this, I am sure there are a number of users out there who will now probably take a closer look at whether or not they will upgrade.

15 May 1992[6] 3 1, 2, 3 2, 3 3.0, 3.1 (preferred) Included Corel Photo-Paint asp ( for bitmap editing), CorelSHOW (for creating on-screen presentations), CorelCHART (for graphic charts), Mosaic and CorelTRACE (for vectorizing bitmaps). The inclusion of this software was the precedent for the actual graphic suites.[7] CorelDraw for Unix also became available.[8][9] The fonts bundled with CorelDraw are no longer in the proprietary Corel format WFN, but in Type 1 PostScript fonts and TTF TrueType formats.
Pros: I've been using CorelDraw since version 3 back in 1993. CorelDraw combines the features of apps like Illustrator, Photoshop and Indesign in one intuitive and easy to use application. Need to design a vector ad that uses a few images? Edit the image and adjust resolution inside CorelDraw without having to first use another program like Photoshop. Need page layout for a multi-page project? Do it all in CorelDraw instead of having to build every page or ad separately and import into a separate application just for page layout. In addition to features that allowed us to use a single program rather than multiple, CorelDraw has an assortment of shortcuts that just make sense, and that Adobe hasn't bothered to include an easy way to accomplish in programs like Illustrator. Select the next object below or last below is a perfect example of this. With Illustrator a simple feature like this wasn't possible until CS5, while Corel had it for years before. All in all, CorelDraw's ease of use and flexibility saved me countless hours over the years.
This is part of the Page Setup, but it's an important step. After defining the page size, you should choose the inside and outside page margins. Inside margins, because it's not good to place text or objects near the edge of page ̶ it's not just about the aesthetics or design visuals ̶ even if there is little difference when cutting and it's not noticeable that there is a margin around the inside.
      Here is what Corel has to say about the Premium service: “Premium membership is an optional benefit that only X6 users can elect to purchase annually on top of their perpetual license (it’s automatically included for current subscribers). We offer our premium members early access to new features, exclusive content and upgrades to the next major version of CorelDRAW. In the past year, we have added over 20 new features that only premium members have access to.”
In 2012 the joint LibreOffice/re-lab team implemented libcdr, a library for reading CDR files from version 7 to X3 and CMX files.[47] The library has extensive support for shapes and their properties, including support for color management and spot colors, and has a basic support for text.[48] The library provides a built-in converter to SVG, and a converter to OpenDocument is provided by writerperfect package. The libcdr library is used in LibreOffice starting from version 3.6,[49] and thanks to public API it can be freely used by other applications.
Leverage all the power you need to publish, share and output important technical documents, including a new capability to publish to WordPress. Using a diverse set of cross-media publishing and distribution capabilities, including CGM, WebCGM, SVG, PDF, and 3D PDF, you will ensure all of your important technical files will be delivered in a readable format and accessible through online, print and mobile options.
When I learned that CorelDRAW was not available for the Mac, I was shocked. I had just assumed that this graphics program had to be available for Mac OS X. In order to use CorelDRAW on my Mac, I needed a program that allowed me to run Windows on a Mac. My first choice was the virtualization software VirtualBox. It worked, but the performance wasn’t very good and I couldn’t properly configure the screen resolution.
The problem we are having is that 2 computers in our house are viewing special characters differently. For my job we use the plus minus sign a lot. One one computer it works fine, the other computer it appears like an upside down A. They both have word 2003, they both have windows XP and they both use the same printer. So, what is causing this and is there a way to rectify the problem?
In bulleted lists, each paragraph begins with a bullet character. In numbered lists, each paragraph begins with an expression that includes a number or letter and a separator such as a period or parenthesis. The numbers in a numbered list are updated automatically when you add or remove paragraphs in the list. You can change the type of bullet or numbering style, the separator, the font attributes and character styles, and the type and amount of indent spacing.
Unlike other desktop publishing programs, Microsoft Publisher isn't designed to stand alone. It's available as part of certain versions of Microsoft Office, and consequently pairs well with the rest of the Office suite. For example, it natively imports Microsoft Word .doc and .docx files, parsing them perfectly and integrating them into complex layouts with ease. Likewise, if you need a table or graph from Excel in your next newsletter, you can pull it in without hassle.
So, to create multi-level headings, you need to use the Level option just to the right of the List drop-down box. My second- and third-level headings use the same list as the first-level headings (this is necessary), except that they are changed to Level 2 and 3, respectively. Then, when numbering the section heading, you can insert the number of the previous-level heading above it. These can be selected using the arrow to the right of the Number field and selecting one of the levels under “Insert Number Placeholder.” So, the text in the Number field for my second-level heading is ^1.^#^t and it is ^1.^2.^#^t for the third-level heading. This presents the multi-level heading with dots between the numbers and a tab between the numbers and the section heading.
There is no set limit as to how many fonts can be installed in Windows XP, Vista, and Windows 7. For best performance it is recommended that only required fonts be installed at any given time. Having too many fonts installed can decrease performance and lead to font corruption. It is also recommended that TrueType and Adobe Type 1 fonts with the same name not reside within the Windows Fonts folder at the same time. Finally, checking for corrupt fonts periodically is also advised (corrupt fonts are usually zero kilobytes in size). These fonts must be removed from the Fonts folder in Windows.
Adobe has changed the name of Typekit to Adobe Fonts. However, it still appears as Typekit in some programs, such as Photoshop, which will undoubtedly cause some confusion for a while. But the confusion goes deeper than just branding. After all, the font called Adobe Garamond is an “Adobe font,” because it was designed and developed by Adobe. But hundreds of other fonts were designed and developed by other non-Adobe font foundries, and only licensed to be distributed through Typekit. Unfortunately, those are now also called “Adobe Fonts.” So when you’re talking with someone about “Adobe Fonts,” you need to be clear whether you’re referring to the fonts from Adobe or “the service formerly known as Typekit.”
automatic page numbering Adobe Indesign CC 2014, how to insert page numbers. How to skip page number on cover page and back cover. How to start page number 1 after cover and contents page. How to start and end page numbering where you want.Macbook pro, iMac, macbook air, macbook, macbook retina display, macbook retina display 2, mac pro, iMac retina 5k display , mac mini,apple laptop ,custom page numbering. Page numbering tricks in Indesign CC, adobe indesign 2014. Page numbers. all about page numbers indesign. Page numbering advance Indesign. Windows, laptop, desktop.tutorial . how to page number indesign
Microsoft Publisher’s templates make publication design easy. If you need to create a quick publication with minimal effort, you can simply use one of Microsoft Publisher’s many templates. There are hundreds of easy-to-use templates to choose from, which are designed to simplify the layout and make creating your ideal publication quick and easy. If you can’t find the template you’re looking for, simply go online and you’re bound to find one you can download for free!
Cons: Among the couple of problems I can state about this program remains in recommendation to the gradients, since when it is printed it does not work effectively, as if it had low levels. The filters for photos, since they do not deal with pictures with lots of information, they do not look extremely natural or lose the majority of the information when used.
The Classification filter (Figure 7) shows the same categories and icons that are found on the Typekit/Adobe Fonts website for filtering fonts. There are icons for each of eight classifications that were available in earlier InDesign versions, such as Serif, Script, and so on. You can also select properties for weight, width, x-height, contrast, standard or CAPS only, and Default Figure Style.
Pros: CorelDRAW is mostly used software in world of graphics designing in computer and printing press industry. It is the largest world using software that support approximately all languages including unicode languages. It has a lot of tool sets built in the software to design beautiful graphics. It is also using in the newspapers, magazines and books publishing markets. In Pakistan everyone who want become a designer it should have great skills on CorelDRAW. Now these days there are many free and open source softwares available for designing but CorelDRAW is beating all of them.
Therefore, if you send an image with 600 dpi or higher resolution, this will produce only slower and larger files but will not improve the resolution. Some people send images with 1800 dpi, 2400 dpi and more and this only creates much larger files, but does not increase the quality of the output. You'll see it better on screen if you zoom in on the image, but the printed result will be 300/400 dpi. Some people ask about inkjet printers that claim to print at 2400 dpi or more. There's a lot of confusion about this, since they use "dpi" (talking about printed dots per inch), which is the printing quality, not the resolution of the images. And, for large format printers (plotters), there is no need to use high resolution bitmaps ̶ on the contrary, the larger the size the lower the resolution needed. But, since they don't produce color separations and the printing process is totally different, the "300 dpi" standard is not applied to plotters, laser or inkjets.
In 1995-6 I “wrote a book” on my Shakespearian laptop (already out of date at the time!). Now laptop is “broken” (no display on screen), how can I “read” this old format programme? (Old Word prog) Also have it on floppy disc but of course current PC’s have no floppy input, and please I don’t want to have to spend any money on new kit ‘cos I don’t have any spare! Many thanks, Hilary
Publisher's greatest weakness is its lack of graphic design tools. Where other desktop publishing packages let you craft logos or touch up photographs, Microsoft Publisher supports neither. Instead, it sticks to simpler effects such as 3D extrusions, bevels and basic quickshapes. If you're not experienced with any sort of image editing or graphic design, you might not miss those omissions, but the ability to smooth out a blemish or recolor a stock logo can make all the difference between a template and a personalized publication. If you want a program that offers more graphic design tools, you might be interested in Xara Page & Layout Designer.
I have found that even the same letter fonts within word vary from installation to installation. If you want to establish a estandar in portable documents definetely use PDF but if you MUST MUST be able to see a word document exactly as it is seen in another computer (because you have put a lot of work already fixing it and its too long) what you can do is in the original computer where the the documents looks right, go to c:/windows/fonts then copy all fonts and paste them to a pendrive. then go to the computer where the document is not been seen right and install all fonts anew. It will say that some fonts are already installed, its ok if you do not install them and install everything else. This way you ensure that every font used in the original computer is also in the other one and no sustitue is being used. Good luck!

[Instructions and lists abstracted from Adobe Application Manuals. Adobe, the Adobe logo, Acrobat, Captivate, FrameMaker, Illustrator, InDesign, Photoshop, and RoboHelp are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. All other trademarks are the property of their respective owners. © Adobe Systems Incorporated.]
I’m new to InDesign, and thought I had sorted out figure numbering but am having trouble with the way that figures are numbered in my document. I set it up as described in this post, but some of my figures are in line and the captions are just another line of text in the body of the story, while others are full page graphics with text box captions that are not linked to the body of the document. Currently, the figure numbers run sequentially through the figures that are in line in the document, and then continue with the full page graphics. The problem is that the full page graphics come before any of the in line graphics, so they are out of order. Is there any way to correct this?
The PSD image format deserves special mention. Being able to import PSD files into InDesign is extremely useful when working with elaborate graphics that have transparent or semi-transparent elements, especially if they are to be placed over colored backgrounds or textures. Another useful feature is the ability to turn the layers in a PSD file on and off directly in InDesign (i.e. without having to open Photoshop).
If the list you want is as simple as "1", "2", "3", you'll appreciate how easy it is to apply this type of numbering in legal documents. Simple numbered lists are different in Word 2000 than they were in Word 97. In Word 2000, the default for even the most basic list is multi-level. For example, if you number an item and press Enter and then press the TAB key, Word automatically formats this number as the second level in an outline numbered list format. Single and multi-level numbering are explained later in this chapter.
      If you are using X6 and upgraded to X6.1 or higher, you also have the ability to see if you are signed in by looking at the bottom right of your screen where you will see a small green man icon. Figure 4 shows a red arrow pointing to this icon. If you are not logged in, the icon will be red. If you click on the black arrow beside the icon, it will display your membership type. Figure 5 shows I have a standard membership and Figure 6 shows that I have a premium membership.

Remember that you must update the values in the sheet if you want to continue the numbering series with the next batch of tickets. For instance, if you want your next batch of tickets to start with 112, you'd open the workbook and change the value 100 to 112, and update the remaining values accordingly. Don't forget to save the workbook after updating the values.


Produce illustrations that contain descriptive text, then output directly to the Translation Memory System (TMS), and process in Corel DESIGNER for translated results to use in multi-lingual global technical publication. Now, you can format text spanning multiple columns and use Corel DESIGNER to author complete user manuals or documents. Next, send the source language text for translation and receive translations to create localized documents literally with one click.

If you want you can rename this layer. Then simply "paste" (Edit > Paste or CTRL+V), to place the logos and background on the new layer. We can create as many pages as we need names, and all will have the same logo and background. But the advantage is, that it will only exist once in the file: and if you modify one element it will be changed on all pages. To avoid a change by mistake, we can "lock" that layer by clicking on the padlock icon on the Object Manager. Then, we just have to select the page and layer (usually, Layer 1), and enter the appropriate text (Name, Phone, etc)
On occasion, re-installing CorelDRAW may be needed to update certain application files. When reinstalling CorelDRAW, turn off all non-critical background services and startup items. This will ensure that no other program conflicts with the installation routine. To disable service and startup items, refer to the instructions previously listed in this document.
I'm using Word 2016 (desktop) on a Windows 10 64-bit system, but this article applies to earlier versions. 365's browser edition displays numbered lists and offers a few basic settings. However, you can't apply either option discussed in this article using the browser. For your convenience, you can download the sample demonstration .docx or .doc file.
Few people think this feature is handy. Yet many of us frequently work with tables given to us by clients. The one I run into most often is the Excel spreadsheet of price listings and item features, which I have to make presentable for a catalog or sales collateral. Many designers recreate these tables from scratch to make them clean and attractive, but this can be time-consuming, especially with large tables.
In its first versions, the CDR file format was a completely proprietary file format primarily used for vector graphic drawings, recognizable by the first two bytes of the file being "WL". Starting with CorelDraw 3, the file format changed to a Resource Interchange File Format (RIFF) envelope, recognizable by the first four bytes of the file being "RIFF", and a "CDR*vrsn" in bytes 9 to 15, with the asterisk "*" being in early versions just a blank.[33] Beginning with CorelDraw 4 it included the version number of the writing program in hexadecimal ("4" meaning version 4, "D" meaning version 14). The actual data chunk of the RIFF remains a Corel proprietary format.
I love picas and points, and have used them almost exclusively since the early 90s (with QX, then InDesign). Of course, I use inches or cm for page sizes and such, but picas/points is just more convenient for fine-tuned positioning on the page. After all, there are almost 3 points in a single mm! I’d rather move something 1 pt than have to type .2 mm.
Hi David, i just figured this out, using CS6, if you place all your graphics and set up a figure number style, and place some of your styles in an inline text frame and the ones that need to fall outside the text frame, the numbering will be off, UNTIL you take the blue anchor frame and anchor it to text of the stand alone graphics, then the figure numbers will then be in order. It also works on 11×17 pages where you have to link the figure number to the previous page and then Anchor Object options and use the Inline or above Line (position) to move text frame to the next page. :-)
The easiest way to diagnose if a problem is file related is to try duplicating the problem with a new file. If the problem cannot be duplicated with a new document, the file at the source of the problems may be damaged or corrupt. In the event of a corrupt file which will no longer open in CorelDRAW, try importing the file into a new document. If this doesn't work, the file may be corrupt beyond repair and an attempt to open the backup should be made.
Tip: Normally, the visibility and printability should be enabled or disabled together. Remember, a visible layer cannot be printed or exported if printability is disabled, and a non-visible layer can be printed and exported if printability is enabled. A layer that is visible but non-printable can be used to keep notes with the file. I use such a layer to keep the print details and other job information, so that I can refer to them at any time.

      For future installs and if you have updated with service packs, you now fall under the new terms of service and you need to get registered. Everything you do from now on is controlled by your new membership. This membership is created and locked to the e-mail account you use. So when you do register, make sure you use an e-mail address that you intend to keep and that you regularly receive e-mails with. Do not select a fake one or one you never use.


Whatever the design, many times your client will ask for an alternate color scheme or additional options for fonts and text attributes. In other cases, you may want more options for your design. Spending time creating these options manually can add hours and additional costs to your project. Instead, why not use “Styles” in CorelDRAW? In this webinar, Anand Dixit, CorelDRAW Master, graphic designer and trainer will show you how to create options for your designs in minutes, including:

15 May 1992[6] 3 1, 2, 3 2, 3 3.0, 3.1 (preferred) Included Corel Photo-Paint asp ( for bitmap editing), CorelSHOW (for creating on-screen presentations), CorelCHART (for graphic charts), Mosaic and CorelTRACE (for vectorizing bitmaps). The inclusion of this software was the precedent for the actual graphic suites.[7] CorelDraw for Unix also became available.[8][9] The fonts bundled with CorelDraw are no longer in the proprietary Corel format WFN, but in Type 1 PostScript fonts and TTF TrueType formats.
So I spent some time trying to figure it out, playing with Normal.dotm and the various styles (List paragraph, List Number, List Bullet etc etc). And finally, when I've got Normal.dotm open (i.e. I'm editing that template file), I get my result: I apply a standard numbered list, and it comes up flush left (i.e. not indented) and hanging at 1.0cm (cos I don't use inches...) and with a tab stop applied at 1.0cm as well - funky stuff!
A CorelDRAW Graphics Suite expert, Roger has been a popular presenter at industry trade shows. He has developed and conducted classroom training and online sessions throughout North America and has authored articles for key industry magazines, including SQE Professional and The Screen Printers Resource Guide, and is a regular contributor to Trophex magazine. You can train with Roger using his book, Bring It Home with CorelDRAW: A Guide to In-House Graphic Design, or by watching his online course, CorelDRAW Essential Training.
Active X controls, embedded OLR objects, and a signature line will display in the document as expected in View mode. In Edit mode, they appear as placeholders that you can delete but not edit. They cannot be moved or resized in Word Online. Advanced controls and macros are only available in the Word desktop app. Learn more about differences between using a document in the browser and in Word.
If you want numbered headings to be underlined, but do not want a line under the number, it can be difficult if you don't know how it works. This is because by default, the format of the number follows the format of the text that follows it. For example, let's say you want to underline a paragraph in a Heading 2 style. Chances are it will look like this:
These limitations will drive some InDesign users crazy, but there is an easy solution, at least for the first two problems: to have separate footnote numbering for a table, and place the numbering under the table rather than at the bottom of the page (interspersed with other footnotes), simply place each table in a text frame of its own. Then, if necessary, you can anchor that text frame into the larger text story. That said, if the new features still don’t meet your needs, check out Peter Kahrel’s article “Going Deep with Footnotes” in InDesign Magazine issue #95.

      2. You now will be monitored in the sense that each version of CorelDRAW that is running will be checking in with a server at Corel. You will only be able to have the program installed on three computers with only one computer being active at one time. In terms of installations, here is a response from a Corel employee, “What this three devices rule means is that you can install it (CorelDRAW) on your workstation, your laptop plus one extra computer without having to purchase additional licenses (most other software vendors limit this to one or two devices), with the condition that CorelDRAW is used by only you and that you never start the desktop software on two computers simultaneously. In other words, it is not OK to buy one box, install it on three computers and have three co-workers use CorelDRAW simultaneously (you need three licenses in that case). The EULA hasn’t changed between X6 and X6.1. This should be clear and is quite standard in terms of software. When you are logged into one of the standard accounts then Corel can verify this.”
You could include things like empty spaces and paragraph breaks in your search if you know, for example, that the word that has to change is followed by a space. Insert these special characters by clicking the “@” arrow to the right of the Find box, or search for a particular glyph by going to the Glyph tab. Replacing glyphs one by one might be best, so that you can monitor your work and progress.

Home Screen/Start workspace changes. The initial screen you see after launching InDesign is now called the Home screen, and it still appears as the Start Workspace. By default, it also appears any time that when no documents are open. You can turn it off by going to the General pane of the Preferences dialog box and turning off Show ‘Start’ Workspace When No Documents Are Open.


Choose the XVL Studio 3D CAD add-on option to get animation tools and work with 3D CAD Engineering files. XVL Studio 3D CAD Corel Edition adds native 3D CAD file format support to ensure support for assemblies and parts from 3D CAD systems, including CATIA, Inventor, PTC Creo, SolidWorks, NX as well as 3D CAD exchange file formats incl. STEP, JT, and others.
In this chapter, we’ll walk through InDesign’s typesetting features. We’ll start with character formatting (font, point size, kerning, and baseline shift are examples of character formatting), move on to paragraph formatting (indents, tabs, space above and below, and composition), and then dive into formatting using character and paragraph styles. Along the way, there may be a joke or two.

CorelDraw full-suite comes with graphic design, page layout, photo editing and vector editing tools. Another plus point is the subscription plan is low compared to other products. We can simply run CorelDraw in low-budget devices. Because couple of years ago,i have used duel-core computer with only 1GB RAM. Also they provide good customer help and support to us. Really appreciate their service.


Thanks. I found this to be extremely helpful for some of those nagging annoyances in iD.  Unfortunately I have to use iD v3 at work.  All but #10 (& the part about changing the bg color in #1) were available as described.  Apparently #10 wasn’t an option until a later version – that would have been nice… but hey – I got a bunch of other awesome workable tips! 😀
×